| |
Rosemary
Extract
| TYPE |
RM-A61 |
Package
.25kgs per bucket |
| |
|
|
TEST |
SPECIFICATION |
| Appearance |
Light
Yellow to yellow powder |
| Moisture |
.5.0%(Karl-Fischer) |
| Total
Ash |
.1.0% |
| Solubility |
Soluble
in Soybean oil |
| Carnosic
Acid |
.25.0% |
| Heavy
Metal (Pb) |
.10.0ppm |
| Heavy
Metal (As) |
.1.0ppm |
| Solvent
Residues |
.10ppm |
MATERIAL SAFETY DATA SHEET
| Section 1 Product and Company Identification |
|
Product Name: Rosemary
Extract, RM-A61, Powder
Catalog Codes: Not available
CAS#: Not available
RTECS: Not available
TSCA: Not available
CI#: Not available
Synonym: Rosemary
Extract,RM-A61,Powder
Chemical Name: Rosemary
Extract
Chemical Formula: Not available |
Contact
information
info@euro-businesslink.com
|
|
|
|
| Section 2 Composition and Information on Ingredients |
|
Composition: Rosemary
Extract, RM-A61, Powder |
| Toxicological Data on Ingredients: Not applicable |
| Section 3 Hazard Identification |
| Potential Acute Health Effects:
Slight hazardous in case of eye
contact (irritant),of inhalation, Non-irritant for skin. Non-hazardous
in case of ingestion
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available
MUTAGENIC EFFECTS: Not available
TERATOGENIC EFFECTS: Not available
DEVELOPMENTAL TOXICITY: Not available
Repeated or prolonged exposure is
not known to aggravate medical condition. |
| Section 4 First-Aid Measures |
| Eye Contact:
Check for and remove any contact
lenses. In case of contact, immediately flush eyes with plenty
of water for at least 15 minutes. Cold water may be used.
WARM water MUST be used. Get medical attention if irritation
occurs.
Skin Contact: Wash with soap
and water. Get medical attention if irritation develops.
Serious Skin Contact: Not available
Inhalation:
If inhaled, remove to fresh air,
if not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Get medical attention.
Serious Inhalation:
Not available
Ingestion:
Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious
person. If large quantities of this material are swallowed,
call a physician immediately. Loosen tight clothing such as
a collar, tie, belt or waistband.
Serious Ingestion: Not available |
| Section 5 Fire and Explosion Data |
| Flammability of the Product: May be
combustible at high temperature.
Auto-ignition Temperature: Not available
Flash Points: Not available
Flammable Limits: Not available
Products of Combustion: Not available
Fire Hazards in Presence of Various
Substances:
Slightly flammable to flammable
in presence of open flames and sparks, of heat. Non-flammable
in presence of shocks.
Explosion Hazards in Presence of
Various Substances:
Risk of explosion of the product
in presence of mechanical impact: Not available
Risk of explosion of the product
in presence of static discharge: Not available
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog
or foam. Do not use water jet.
Special Remarks on Fire Hazards: Not available
Special Remarks on Explosion Hazards:
Organic dusts can form explosive mixtures in air. |
| Section 6 Accidental Release Measures |
|
Small Spill:
Use appropriate tools to put the
spilled solid in a convenient waste disposal container. Finish
cleaning by spreading water on the contaminated surface and
dispose of according to local and regional authority requirements.
Large Spill:
Use a shovel to put the material
into a convenient waste disposal container. Finish cleaning
by spreading water on the contaminated surface and allow to
evacuate through the sanitary system. |
| Section 7 Handling and Storage |
|
Precautions:
Keep away from heat. Keep away from
source of ignition. Empty containers pose a fire risk, evaporate
the residue under a fume hood. Ground all equipment containing
material. Do not breathe dust.
Storage: Keep container tightly
closed. Keep container in a cool, well-ventilated area. Do
not store above 24℃(75.2ºF) |
| Section 8 Exposure Controls/Personal Protection |
| Engineering Controls:
Use
process enclosures, local exhaust ventilation, or other engineering
controls to keep airborne levels below recommended exposure
limits. If user operations generate dust, fume or mist, use
ventilation to keep exposure to airborne contaminants below
the exposure limit.
Personal Protection: Safety glasses.
Lab coat.
Personal Protection in case of a
Large Spill:
Splash goggles. Full suit. Boots.
Gloves. Suggested protective clothing might not be sufficient;
consult a specialist BEFORE handling this product.
Exposure Limits: Not available |
| Section 9 Physical and Chemical Properties |
|
Physical state and appearance: Solid.
(Powdered solid)
Odor: Not available
Taste: Not available
Molecular Weight: Not available
Color: Light
yellow.
pH(1% sol/water): Not available
Boiling Point: Not available
Melting Point: Not available
Critical Temperature: Not available
Specific Gravity: Not available
Vapor Pressure: Not available
Vapor Density: Not available
Volatility: Not available
Water/Oil Dist. Coeff: Not available
Ionicity (in water): Not available
Dispersion Properties: Not available
Solubility: soluble
in oil incompletely |
| Section 10 Stability and Reactivity Data |
| Stability: The product
is stable
Instability Temperature: Not available
Conditions of Instability: Excess
heat, incompatible materials
Incompatibility with various substance: Not available
Corrosivity: Not available
Special Remarks on Reactivity: No information
available at this time
Special Remarks on Corrosivity: Not available
Polymerization: will not
occur. |
| Section 11 Toxicological Information |
| Routes of Entry: Inhalation.
Ingestion
Toxicity to Animals:
LD50: Not available
LC50: Not available
Chronic Effects on Humans: Not available
Other Toxic Effects on Humans:
Slightly hazardous in case of inhalation
Special Remarks on Toxicity to Animals: Not available
Special Remarks on Chronic Effect
on Humans: Not available
Special Remarks on other Toxic Effect
on Humans:
Acute Potential Health Effects:
Skin:
Unlikely to cause skin irritation.
Eyes: Dust may cause eye irritation
Ingestion: Swallowing this material
during normal handling is not likely to be harmful.
Inhalation: This material may produce
dust. May cause respiratory tract irritation. Breathing small
amounts of this material during normal handling is not likely
to be harmful. |
| Section 12 Ecological Information |
| Ecotoxicity: Not available
BOD5 and COD: Not available
Products of Biodegradation:
Possibly hazardous short term degradation
products are not likely. However, long term degradation products
may arise.
Toxicity of the Products of Biodegradation: Not available
Special Remarks on the Products
of Biodegradation: Not available. |
| Section 13 Disposal Considerations |
| Waste Disposal:
Waste must be disposed of in accordance
with federal, state and local environmental control regulations. |
| Section 14 Transport Information |
| DON Classification: Not a
DOT controlled material
Identification: Not applicable.
Special Provisions for Transport: Not applicable. |
| Section 15 Other Regulatory Information |
|
Federal and State Regulations: No products were found.
Other Regulations: Not available
Other Classifications:
WHMIS (Canada): Not controlled
under WHMIS (Canada).
DSCL (EEC):
This product is not classified according
to the EU regulations. Not applicable.
HMIS (U.S.A):
Health Hazard: 1
Fire Hazard: 1
Reactivity: 0
Personal Protection: a
National Fire Protection Association
(U.S.A.)
Health Hazard: 1
Fire Hazard: 1
Reactivity: 0
Protective Equipment:
Not applicable.
Lab coat.
Not applicable.
Safety glasses. |
| Section 16 Other Information |
| References: Not available
Other Special Considerations: Not available
Created: 8/11/2005
The information above is believed
to be accurate and represents the best information currently
available to us. However, we make no warranty of merchantability
or any other warranty, express or implied, with respect to
such information, and we assume to liability resulting from
its use. User should make their own investigations to determine
the suitability of the information for their particular purposes.
In no event shall the manufacturer be liable for any claims,
losses, or damages of any third party or for lost profits
or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if he manufacturer has been
advised of the possibility of such damages. |
Please
send your inquiry to info@euro-businesslink.com
|
|