MATERIAL SAFETY DATA SHEET

Section 1        Product and Company Identification

Product Name: Rosemary Extract, RM-A12, liquid

Catalog Codes: Not available

CAS#: Not available

RTECS: Not available

TSCA: Not available

CI#: Not available

Synonym: Rosemary Extract, RM-A12, liquid

Chemical Name: Rosemary Extract

Chemical Formula: Not available

Contact information

info@euro-businesslink.com

Section 2        Composition and Information on Ingredients

Composition: Rosemary Extract, RM-A12, liquid

Toxicological Data on Ingredients: Not applicable

Section 3        Hazard Identification

Potential Acute Health Effects:

Slight hazardous in case of eye contact (irritant), of inhalation, Non-irritant for skin. Non-hazardous in case of ingestion

Potential Chronic Health Effects:

CARCINOGENIC EFFECTS: Not available

MUTAGENIC EFFECTS: Not available

TERATOGENIC EFFECTS: Not available

DEVELOPMENTAL TOXICITY: Not available

Repeated or prolonged exposure is not known to aggravate medical condition.

Section 4        First-Aid Measures

Eye Contact:

Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. WARM water MUST be used. Get medical attention if irritation occurs.

Skin Contact: Wash with soap and water. Get medical attention if irritation develops.

Serious Skin Contact: Not available

Inhalation:

If inhaled, remove to fresh air, if not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Serious Inhalation: Not available

Ingestion:

Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.

Serious Ingestion: Not available

Section 5        Fire and Explosion Data

Flammability of the Product: May be combustible at high temperature.

Auto-ignition Temperature: Not available

Flash Points: Not available

Flammable Limits: Not available

Products of Combustion: Not available

Fire Hazards in Presence of Various Substances:

Slightly flammable to flammable in presence of open flames and sparks, of heat. Non-flammable in presence of shocks.

Explosion Hazards in Presence of Various Substances:

Risk of explosion of the product in presence of mechanical impact: Not available

Risk of explosion of the product in presence of static discharge: Not available

Fire Fighting Media and Instructions:

SMALL FIRE: Use DRY chemical powder.

LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Special Remarks on Fire Hazards: Not available

Special Remarks on Explosion Hazards: Organic dusts can form explosive mixtures in air.

Section 6        Accidental Release Measures

Small Spill:

Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.

Large Spill:

Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Section 7        Handling and Storage

Precautions:

Keep away from heat. Keep away from source of ignition. Empty containers pose a fire risk; evaporate the residue under a fume hood. Ground all equipment containing material. Do not breathe dust.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area. Do not store above 24℃(75.2ºF)

Section 8        Exposure Controls/Personal Protection

Engineering Controls:

Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Personal Protection: Safety glasses. Lab coat.

Personal Protection in case of a Large Spill:

Splash goggles. Full suit. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.

Exposure Limits: Not available

Section 9        Physical and Chemical Properties

Physical state and appearance: liquid.

Odor: Not available

Taste: Not available

Molecular Weight: Not available

Color: Deep yellow.

pH(1% sol/water): Not available

Boiling Point: Not available

Melting Point: Not available

Critical Temperature: Not available

Specific Gravity: Not available

Vapor Pressure: Not available

Vapor Density: Not available

Volatility: Not available

Water/Oil Dist. Coeff: Not available

Ionicity (in water): Not available

Dispersion Properties: Not available

Solubility: soluble in oil completely

Section 10        Stability and Reactivity Data

Stability: The product is stable

Instability Temperature: Not available

Conditions of Instability: Excess heat, incompatible materials

Incompatibility with various substance: Not available

Corrosivity: Not available

Special Remarks on Reactivity: No information available at this time

Special Remarks on Corrosivity: Not available

Polymerization: will not occur.

Section 11       Toxicological Information

Routes of Entry: Inhalation. Ingestion

Toxicity to Animals:

LD50: Not available

LC50: Not available

Chronic Effects on Humans: Not available

Other Toxic Effects on Humans:

Slightly hazardous in case of inhalation

Special Remarks on Toxicity to Animals: Not available

Special Remarks on Chronic Effect on Humans: Not available

Special Remarks on other Toxic Effect on Humans:

Acute Potential Health Effects:

Skin: Unlikely to cause skin irritation.

Eyes: Unlikely may cause eye irritation

Ingestion: Swallowing this material during normal handling is not likely to be harmful.

Inhalation: This material may produce dust. May cause respiratory tract irritation. Breathing small amounts of this material during normal handling is not likely to be harmful.

Section 12        Ecological Information

Ecotoxicity: Not available

BOD5 and COD: Not available

Products of Biodegradation:

Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.

Toxicity of the Products of Biodegradation: Not available

Special Remarks on the Products of Biodegradation: Not available.

Section 13       Disposal Considerations

Waste Disposal:

Waste must be disposed of in accordance with federal, state and local environmental control regulations.

Section 14        Transport Information

DON Classification: Not a DOT controlled material

Identification: Not applicable.

Special Provisions for Transport: Not applicable.

Section 15        Other Regulatory Information

Federal and State Regulations: No products were found.

Other Regulations: Not available

Other Classifications:

WHMIS (Canada): Not controlled under WHMIS (Canada).

DSCL (EEC):

This product is not classified according to the EU regulations. Not applicable.

HMIS (U.S.A):

Health Hazard: 1

Fire Hazard: 1

Reactivity: 0

Personal Protection: a

National Fire Protection Association (U.S.A.)

Health Hazard: 1

Fire Hazard: 1

Reactivity: 0

Protective Equipment:

Not applicable.

Lab coat.

Not applicable.

Safety glasses.

Section 16        Other Information

References: Not available

Other Special Considerations: Not available

Created: 8/11/2005

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume to liability resulting from its use. User should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall the manufacturer be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the manufacturer has been advised of the possibility of such damages.